RDZM-T24FZ

Zigbee® Transceiver Module - 2.4 GHz IEEE 802.15.4 compliant

The RDZM-T24FZ is a second generation Zigbee® / IEEE 802.15.4 RF Transceiver Modules for the 2.4 GHz unlicensed ISM band. This chip enables industrial grade applications by offering state-of-the-art selectivity / co-existence, excellent link budget, operation up to 125°C and low voltage operation. In addition, the RDZM-T24FZ provides extensive hardware support for frame handling, data buffering, burst transmissions, data encryption, data authentication, clear channel assessment, link quality indication and frame timing information. These features reduce the load on the host controller. The excellent coverage and low power consumption makes it an ideal choice for many applications. In a typical system, the RDZM-T24FZ will be used together with a microcontroller and a few additional passive components.

Frequency of operation

• 2.4 to 2.5 GHz

Interface

• Single board transceiver with SPI Interface

Receiver Sensitivity

• High receiver sensitivity of -98 dBm

Supply Voltage

• 1.8 V to 3.8 V

Power Consumption

• In Receive mode: 18.5 mA
• In Transmit mode: 25.8 mA
• < 1uA in power down mode

RF Output Power

• Programmable output power from -20 dBm to +5 dBm

Data Rate

• 250 kbps

Modulation

• OOK, 2 FSK, GFSK and MSK supported

Other features

• Integrated analog temperature sensor
• Digital RSSI output
• Programmable carrier sense (CS) indicator
• Optional automatic whitening and de-whitening of data
• Wake-on radio functionality for automatic low-power RX polling
• Separate 64-byte TX and RX data FIFOs (enables burst mode data transmission)

SMA Whip Antenna